RHB-STONE PRIMER PU-1K
Pebble Stone Floor Coverings
DEFINITION
RHB STONE PU PRIMER -1K is a polyurethane-based, solvent-based, one-component surface primer for stone carpet coatings that improves adhesion in bulk type systems.
APPLICATION AREAS
It is a polyurethane-based floor primer used indoors and outdoors to prevent dusting, increase adherence and cut moisture before stone carpet application.
APPLICATION
The surface to be primed should be clean, free of grease and dirt, especially dry and repaired. RHB PRIMER is applied to the floor with a brush or roller. Under normal conditions, curing time is shortened in hot environments and may be longer in cold environments. After the primer application dries, RHB STONE UV RESIN + STONE mixture is applied to the floor.
RHB-STONE PRIMER PU-1K
-
Prevents dusting after application.
-
Eliminates adhesion problems (reaction deterioration) caused by the ground.
-
High bonding and adhesion strength
-
Resistant to water, moisture and heat after application.
-
It is very easy to apply.
-
Applicable at +5 / +30 'C.
-
Minimum total consumption: 0.1-0.3 kg/m2
-
200 kg sheet metal barrel, 15 Kg metal bucket
-
Ready for use.
-
It can be applied without thinning.
-
Special solvents can be used when necessary.
-
drying time is 4-6 hours.