Create New Request

RHB-STONE EP RESIN-2K

Pebble Stone Floor Coverings

DEFINITION
RHB STONE UV RESIN EP-2K, %100 katı madde içeren, çift komponentli, epoksi esaslı likit bir üründür. Reaksiyon olarak tepkimeye geçen oldukça dayanıklı ve sert fakat elastik bir film oluşturur. Mükemmel UV direncine ve yüksek hidrofobik özelliğe sahiptir. 

AREAS OF USE
-Parking areas / Walking paths
-Bicycle paths / Public parks
-Office buildings / Landscape plans
-Schools / Tree pits
-Garden design / Swimming pool surroundings
-Disabled access ramps
-Roof terraces and balconies

And it can be used easily in similar areas.

APPLICATION TYPE
Surface preparation
The surface should be cleaned using pressurized water if possible; oil, grease, fuel and paraffin wastes should be removed, and mold release agents, cement residues and chips should be completely removed. Surface defects and cracks should be repaired by filling with suitable products.

Priming
Regardless of the surface condition (porous or non-porous), it should be used as a primer (RHB PRIMER PU 100-1K or RHB PRIMER EP-100).

Binder resin application
Following the drying of the primer layer, pebble stone granules, which are the first stage of the application, will be mixed for 10 minutes with the help of a concrete mortar mixing machine or mixer mixer by adding polymer-based, one-component stone binder polymer resin at a ratio of %6.

FLOOR COVERING CONSTRUCTION APPLICATION

FOR HORIZONTAL SURFACES
In order to obtain a thickness of 8 mm from stone granules with a thickness of 2-4 mm or 4-7 mm, 0.800 kg of polymer-based stone binder resin should be used for an average of 13 kg of pebble stone granules per square meter.
(Stone granule sizes can be used in desired sizes)

The mixture is laid on the ground by compacting it with a vibrating machine or trowel as if pouring asphalt.

Consumption
-100 Kg pebble
-6 Kg RHB STONE UV RESIN EP-2K

FOR VERTICAL SURFACES
In order to obtain a thickness of 5-6 mm from stone granules with a thickness of 2-4 mm or 4-7 mm, 0.420 kg of polymer-based stone binder resin should be used for an average of 8 kg of pebble stone granules per square meter. Thickening powder should be added for thickening and hanging on the wall.

(Stone granule sizes can be used in desired sizes)

PACKAGING
A. component:10 Kg
B. component: 5 kg metal packages

SHELF LIFE
12 months in unopened airtight packages

RHB-STONE EP RESIN-2K

  • The product is used for multiple purposes.
  • As a coating on tiles such as marble and ceramic,
  • Natural stones also as binders,
  • As a glossy floor on balconies,
  • It can also be used for waterproofing concrete.
  • It can be applied in thick layers and does not bubble.
  • Provides fast drying in cold weather, even in damp concrete.
  • The utilization rate is %6.
  • It has high wetting and crosslinking properties.
  • 100 Kg pebble stone
  • 6 Kg INNOPUR STONE UV RESIN EP-2K
  • 1Kg thickening powder.
Catalog
Previous project
All projects
Next project